Miri's precious shungite jewellery

The precious shungite stone has a weight of approx. 1.0gIn total,the cufflinks weigh 7.9gThe size is approx. 2.0x4.0cm The processed material consists of: 3% copper 4% silver 93% pewterTheseexclusive precious shungite cufflinks are handcrafted with love by our good friend Miroslava Grentzerovaand you should rely on your intuition when choosing, then you will get your matching stone. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be brought into a certain form. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method - For many years I have dedicated myself to gemstones and have chosen the Tiffany method for making jewellery and gemstone settings. This method is unique because you can set the gemstones in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and pewter with 4% silver content supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can use a cotton cloth to make the pewter shine again and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) Youcan remove any gemstone from the jewellery without damaging it

EXCLUSIVE precious shungite pendant - handmade N°193 The precious shungite stone has a weight of approx. 1.9g. The pendant weighs a total of 4.41g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for making jewellery and gemstone settings. This method is unique as it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°195 The precious shungite stone has a weight of approx. 6.92g. The pendant weighs a total of 19.21g The size is approx. 6cm x 3.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for making jewellery and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire, which always ends in a spiral, and tin with a 4% silver content support the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°197 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for jewellery making and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°198 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for jewellery making and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°199 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for making jewellery and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire, which always ends in a spiral, and tin with a 4% silver content support the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°200 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for jewellery making and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°201 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for jewellery making and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°202 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for jewellery making and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°203 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for making jewellery and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire, which always ends in a spiral, and tin with a 4% silver content support the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°204 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for jewellery making and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°205 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for jewellery making and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°206 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for jewellery making and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°207 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for making jewellery and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°208 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for jewellery making and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°209 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for jewellery making and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°210 The precious shungite stone has a weight of approx. 1.91g. In total, the pendant weighs 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for jewellery making and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°211 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for jewellery making and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°212 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for jewellery making and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°213 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for making jewellery and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°214 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for jewellery making and gemstone settings. This method is unique as it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka

EXCLUSIVE precious shungite pendant - handmade N°215 The precious shungite stone has a weight of approx. 1.91g. The pendant weighs a total of 5.28g The size is approx. 3.5cm x 1.5cm The processed material consists of: 3% copper 4% silver 93% pewter This exclusive precious shungite pendant is handmade with love by our good friend Miroslava Grentzerova. When choosing, you should rely on your intuition to find the right stone for you. Precious shungite jewellery is not only decorative, it also protects against negative radiation. "Every stone is unique, I feel that each one has "its own story" and wants to be moulded into a certain shape. When you receive my jewellery, take it in your hand, close your eyes and give it a name." Unique gemstone jewellery - the Tiffany method For many years I have dedicated myself to gemstones and chose the Tiffany method for jewellery making and gemstone settings. This method is unique because it allows the gemstones to be set in their natural form. Without damaging them and without having to be cut. The material used also harmonises with the stone and body. Copper wire that always ends in a spiral and tin with 4% silver content, supports the effect of gemstones and their natural conductive power. Copper spirals under the pewter, does it make sense? I am convinced that it does. (Bernoulli spiral in Universum) Care is easy. The black patina can come off over time and the pewter will turn grey if you leave your jewellery lying around for a long time. You can make the pewter shine again with a cotton cloth and you can also apply a new patina. If you want to keep your jewellery in good condition, lubricate it with rapeseed oil. This prevents grey stains as the oil acts as an antioxidant. (Rapeseed oil is used by old blacksmiths to protect steel) You can remove any gemstone from the jewellery without damaging it. Your Mirka